Accelerator Technologist I - Metal Finishing Shop
- LocationMenlo Park, CA, United States
- Work typeOn-site
- EmploymentFull-time
- Posted18 November 2026
- SourceStanford University's careers page (Oracle Recruiting)
Last checked46 min ago: still listed on Stanford University's careers page. First seen 3 h ago.
At a glance
- ContractFixed term, 1 year
- Skills and toolsDriver's license
Read from the ad by RoleFinder, with rules and an AI reading; the description is the source.
About the role
This is a 1-year fixed term. The Accelerator Technologist I in Metal Finishing works under general supervision and performs assignments of basic to intermediate complexity. The technician will work primarily in the Metal Finishing Shop including backup for the Metal Finishing Pre-Treatment Facility (MFPF) and will be required to assist in field installation support to include mechanical assembly as needed for devices to be installed in shop and experimental areas.
With Oversight, the Technologist I will conduct blocks of work as a complete project, or as a portion of a larger and more diverse project, with strict adherence to site-specific safety requirements as well as work planning and control (WPC) protocols for shop, field or experimental areas. Assignments may include assisting in the development of fixtures and tooling, chemical cleaning various metals for high vacuum systems, vapor degreasing of various materials, electroplating, polishing, pressure washing, and steam cleaning. Additionally, the incumbent will assist with chemical bath maintenance and processing. Those process tanks expose shop personnel to the various chemicals including, potassium cyanide, nitric acid, hydrochloric acid, phosphoric acid, sulfuric acid, sodium hydroxide, alcohol, acetone, various alkaline concentrates, and other liquid and powder chemicals. Very strict PPE requirements must be adhered to including face protection with either goggles, face mask, or powered air purifying respirator (PAPR) - depending on operation, long sleeves, long pants, and closed toed shoes.
The Technologist will work in radiation-controlled areas and will need to achieve RWT-II qualification. The incumbent will communicate and coordinate with line supervision as to effort status, issues, progress, and completion timelines. Must be able to follow all SLAC safety rules and regulations and identify areas for improvement.
Responsibilities:
- Chemically clean a variety of metals used in ultra-high vacuum systems
- Vapor degrease various materials
- Steam clean various materials, including large assemblies for vacuum use
- Support electroplating of base metals primarily with copper, gold, nickel
- Process aluminum cleaning and polishing
- Follow all safety and health regulations and practices
- Select and use appropriate hand tools including wrenches, drills, drivers, etc.
- Follow mechanical drawings to understand metal finishing, assembly, or installation requirements
- Operation of cranes, hoists, pallet jacks, and forklifts, to lift or move large mechanical equipment precisely and safely
- Precisely follow detailed procedures or work instructions
- Operation of machine tools including manual drill presses, band saws, and others as appropriate
- Perform basic plumbing system inspections and repair as necessary
- Work independently and as part of a team.
- Coordinate, plan, and organize tasks.
- Routinely meet production quality and schedule requirements while effectively balancing quality and quantity of work
- Comply with good shop practices and safety requirements
- Exercise good judgment while facilitating the safe and efficient flow of work
- Seek assistance from management, senior technical, and/or safety experts as well as report issues and statuses up through line management when appropriate
Required Skills:
- Strong mechanical capability
- Experience with Industrial machinery including forklifts, cranes, hoists, and pallet jacks
- Ability to use measuring devices such as tape measures, beakers, scales
- Ability to follow all safety and health regulations and practices
- Ability to select and use appropriate hand tools including wrenches, drills, drivers, etc.
- Must be able to read, understand and follow mechanical drawings
- Ability to precisely follow detailed procedures or work instructions
- Able to use machine tools including manual drill presses, band saws, and others as appropriate
- Experienced in the performance of basic plumbing systems and assembly
- Able to Work independently and as part of a team.
- Possess ability to coordinate, plan, and organize tasks.
- Possess excellent verbal/written communications skills.
- Ability to routinely meet production quality and schedule requirements while effectively balancing quality and quantity of work
- Demonstrated understanding of, and ability to, comply with good shop practices and safety requirements
- Ability to demonstrate good judgment while facilitating the safe and efficient flow of work
- Ability to demonstrate the understanding of when, how and where to seek assistance from technical and/or safety experts as well as report up through line management when appropriate
- Demonstrated understanding of the basic concepts related to metal finishing and specific environmental, health and safety hazards
Desired Skills:
- Strong working knowledge of mathematics to perform calculations of mix ratios and geometric dimensioning
- Experience with executing written procedures
- Experience with troubleshooting electro-mechanical systems
- Demonstrated ability in basic understanding of UHV handling techniques
- Proficiency with standard office computer applications
Education and Licenses:
- Vocational school, apprenticeship or equivalent metal finishing and mechanical experience
- Must possess a valid California Driver's License and a clean driving record for operating vehicles on SLAC site.
SLAC employee competencies:
- Effective Decisions : Uses job knowledge and solid judgment to make quality decisions in a timely manner.
- Self-Development : Pursues a variety of venues and opportunities to continue learning and developing.
- Dependability : Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
- Initiative : Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
- Adaptability : Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
- Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriate written, spoken, presented messages.
- Relationships : Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
Work standards:
- Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
- Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned. Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1—General Policy and Responsibilities: http://www-group.slac.stanford.edu/esh/eshmanual/pdfs/ESHch01.pdf
Responsibilities
Core Duties :
- Perform assigned and prioritized tasks. Assignments are of limited complexity and application and typically include using appropriate tools, equipment, test procedures, and shop and safety practices in the fabrication/assembly of components including prototypes, experimental apparatus set-up, equipment operation, and testing and check-out of these devices.
- May operate cranes, hoists and forklifts to move equipment.
- Work is spot checked while in progress or inspected upon completion.
- Perform assigned duties in incompliance with site-specific requirements as determined by work planning and control (WPC) protocols.
- Adhere to safety rules.
Minimum Education and Experience
Basic electronic or mechanical knowledge, and/or related subject matter, as obtained in vocational or trade-oriented curriculum or a combination of education and relevant work experience.
Knowledge, Skills and Abilities :
- Ability to perform a variety of routine skilled work with limited complexity. This includes fabrication/assembly of components including prototypes, experimental apparatus set-up, equipment operation, and testing using appropriate tools, equipment, test procedures, and safety practices.
- Familiarity with applicable test, assembly and fabrication tools.
- Must be able to perform all work in accordance with established safety and work planning and control procedures.
Certificates and Licenses Required
Valid California Non-commercial Class C Driver's license.
Get open roles ranked against your CV
Add your CV once. RoleFinder ranks the open roles where you want to work, plus remote ones, against it, shows your best 12 with a one-line reason each, and emails you new matches once a week. The file is read once by AI and not kept; employers never see it.
Sign in with Google or email to start. How we handle your CV