Accelerator Technologist II - Cryogenics Plant Operator (Controls & Instrumentation)
- LocationMenlo Park, CA, United States
- Work typeOn-site
- EmploymentFull-time
- Posted18 November 2026
- SourceStanford University's careers page (Oracle Recruiting)
Last checked38 min ago: still listed on Stanford University's careers page. First seen 3 h ago.
At a glance
- Experience2+ years
- EducationHigh school diploma
- Skills and toolsDriver's license
Read from the ad by RoleFinder, with rules and an AI reading; the description is the source.
About the role
Responsibilities:
The Cryogenic Division at SLAC National Accelerator Laboratory is seeking a Accelerator Technologist II – Cryogenics Plant Operator to support the operation of the Cryogenic Plant (2.0K Helium Refrigeration System) that is part of the LCLS Superconducting Linear Accelerator. You will work under general or intermittent supervision or under advisement from higher level Accelerator Technologists and perform task assignments of intermediate complexity in instrumentation & controls work and one or more technical areas of mechanical, refrigeration/vacuum, electrical/electronics, etc. all of which are part of the cryogenics plant operator skillsets.
The Technologist II will conduct a block of work as instructed or assist as a portion of a larger and more diverse project, with strict adherence to site-specific safety as well as work planning and control (WPC).
Given the nature of this position, SLAC will require onsite work.
Specific job duties include but are not limited to:
- Calibrate, test, and validate sensors (such as temperature, pressure, level, and flow transmitters) under cryogenic conditions.
- Perform preventive and corrective maintenance on cryogenic hardware, vacuum systems, transfer lines, and control loops.
- Diagnose and resolve electrical, signal, or mechanical issues in complex process and data acquisition systems.
- Specify, procure, and install new instrumentation and wiring into facility-wide control, safety interlock, and monitoring networks (e.g., PLCs, or SCADA).
- Ensure strict adherence to safety protocols for handling liquefied gases (like liquid nitrogen, helium, etc.) and working in hazardous or restricted environments.
- Perform tests and precision specification measurements on system components and multiple utility support systems.
- Utilize a wide variety of tools and equipment, such as specialized hand tools, portable electronic test equipment, and calibration/maintenance tools.
- Diligently maintain equipment operating records and daily log sheets to ensure compliance and traceability.
- Collaborate with experimenters, engineers, physicists, and other groups on the design, installation, modification, and performance of cryogenic systems.
- Become proficient and improve multiple operator skills sets; seek thorough understanding of Instrumentation & Controls, mechanical tech and electrical/electronics principles and hardware.
- Work on and around pressure systems, confined spaces, and elevation sometimes requiring fall protection.
- Work schedule may include overtime hours, off-shift, weekends & holiday schedules.
Note: Technologist II is expected to perform intermediate assignments in at least one discipline/skill in mechanical work, instrumentation & controls, refrigeration/vacuum, process control or electrical/electronic.
Qualifications:
- H.S./GED or vocational school apprenticeship, plus two years of laboratory or industrial mechanical/electrical experience can be substituted. College, Technical degree, or military training, preferred.
- Demonstrated electrical-mechanical aptitude and ability to perform intermediate complexity controls/instrumentation job duties.
- Ability to read and interpret instrumentation, piping, electrical and electronic drawings, and sketches.
- Understanding of basic principles of cryogenic engineering including properties of helium & nitrogen gases and Ohm’s Law; pressure & temperature, vacuum, cryogenic fluids, electrical/instrumentation.
- Demonstrated mechanical aptitude and/or practical understanding of laws of electricity
- The ability to learn to use a wide variety of hand & power tools.
- The candidate should be familiar with site environmental and safety rules, regulations, and requirements, and be trained to handle, store, and dispose of hazardous materials appropriately.
- Demonstrated use of solid math skills & computer proficiency.
- Demonstrated understanding and ability to control the helium cryogenic process.
- Demonstrated ability to install, maintain, calibrate, and diagnose pneumatic and electronic instruments and control loops: ability to read and understand PLC Ladder Logic
- Demonstrated knowledge and experience in multiple cryogenics technical operator skillsets such as Instrumentation & Controls, Gas Process, and electrical/electronic principles and hardware.
- Requires demonstrated ability to learn new skills, gain technical knowledge, and ability to work under supervision and written & verbal instruction.
- Able to effectively communicate technical issues with senior engineers, operators, tech support personnel, vendors, and others in a diverse multicultural environment.
- Knowledge of pressure systems including pressure vessels, piping and safe operation thereof.
- Ability to operate forklifts, overhead cranes, scissor lifts, boom lifts, and other industrial equipment.
- Must possess a valid driver’s license to drive vehicles on site.
SLAC Competencies:
- Effective Decisions : Uses job knowledge and solid judgment to make quality decisions in a timely manner.
- Self-Development : Pursues a variety of venues and opportunities to continue learning and developing.
- Dependability : Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
- Initiative : Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
- Adaptability : Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
- Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriately written, spoken, presented messages.
- Relationships : Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
PHYSICAL REQUIREMENTS/ WORKING CONDITIONS :
- Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job.
WORK STANDARDS:
- Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
- Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned. Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1 General Policy and Responsibilities: http://www-group.slac.stanford.edu/esh/eshmanual/pdfs/ESHch01.pdf
Responsibilities
Core Duties :
- Work on assignments requiring intermediate expertise in in one discipline or skill with some level of efficiency and minimum supervision while learning to maximize compliance with established work and planning procedures.
- Work on assignments at the component, module, or sub-system level.
- Follow explicit technical guidance for new or unfamiliar procedures.
- Recurring, routine technical work is reviewed generally for conformance to specifications.
- Perform assigned duties in compliance with site-specific requirements as determined by work planning and control (WPC) protocols.
- May perform any of the duties described in the Accelerator Technologist I specification or other duties as assigned.
- Adhere to safety rules.
Minimum Education and Experience
Intermediate level proficiency and work experience on several different technical assignments or a combination of education and relevant work experience.
Additional two years of applicable experience may substitute for formal education.
Knowledge, Skills and Abilities :
Accelerator Technologist II has all the qualifications described in the Accelerator Technologist I specification plus the following qualifications:
- Demonstrated proficiency and work experience on several different technical assignments such that working knowledge will include some breadth in areas such as layout, fabrication, trouble-shooting, test, repair and modification of technical equipment.
- Must have experience with the applicable test, assembly and fabrication tools.
- Must be able to perform all work in accordance with established safety and work planning and control procedures.
Certificates and Licenses Required
Valid California Non-commercial Class C Driver's license.
Get open roles ranked against your CV
Add your CV once. RoleFinder ranks the open roles where you want to work, plus remote ones, against it, shows your best 12 with a one-line reason each, and emails you new matches once a week. The file is read once by AI and not kept; employers never see it.
Sign in with Google or email to start. How we handle your CV